Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
pin-configuration [2017/01/25 16:11]
arthur
pin-configuration [2017/11/13 21:28] (current)
arthur
Line 5: Line 5:
 If other cases, a given pin is tied to a given peripheral on the board. ​ If other cases, a given pin is tied to a given peripheral on the board. ​
  
-See [[http://​smoothieware.org/​pinout]|Pinout] to learn about which pins are where. ​+See [[http://​smoothieware.org/​pinout|Pinout]] to learn about which pins are where. ​
  
 You can have a pin's output inverted by adding a **"​!"​** after this pin's number in the config line, example :  You can have a pin's output inverted by adding a **"​!"​** after this pin's number in the config line, example : 
  
-[[code]]+<code>
 my_pin_name ​                     19! my_pin_name ​                     19!
-[[/code]]+</code>
  
 There are other modifiers for pins : There are other modifiers for pins :
Line 17: Line 17:
 <callout type="​primary"​ icon="​true"​ title="​ All options">​ <callout type="​primary"​ icon="​true"​ title="​ All options">​
  
-|| ! || invert ​pin || +|| ! || Exclamation mark || Invert ​pin || 
-|| o || set pin to open drain || +|| o || Lowercase O letter || Set pin to open drain || 
-|| ^ || set pin to pull up || +|| ^ || [[https://​en.wikipedia.org/​wiki/​Caret|Caret]],​ Shift+6 on QWERTY keyboards || Set pin to pull up (Default on most pins) || 
-|| v || set pin to pull down || +|| v || Lowercase v letter || Set pin to pull down || 
-|| - || to set no pullup || +|| - || Minus sign || To set no pullup || 
-|| @ || to set repeater mode ||+|| @ || At / Arobase sign || To set repeater mode ||
  
 </​callout>​ </​callout>​