Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
pin-configuration [2017/01/25 15:55]
arthur
pin-configuration [2021/01/08 15:57] (current)
Line 5: Line 5:
 If other cases, a given pin is tied to a given peripheral on the board.  If other cases, a given pin is tied to a given peripheral on the board. 
  
-See [http://smoothieware.org/pinout Pinout] to learn about which pins are where. +See [[http://smoothieware.org/pinout|Pinout]] to learn about which pins are where. 
  
 You can have a pin's output inverted by adding a **"!"** after this pin's number in the config line, example :  You can have a pin's output inverted by adding a **"!"** after this pin's number in the config line, example : 
  
-[[code]]+<code>
 my_pin_name                      19! my_pin_name                      19!
-[[/code]]+</code>
  
 There are other modifiers for pins : There are other modifiers for pins :
Line 17: Line 17:
 <callout type="primary" icon="true" title=" All options"> <callout type="primary" icon="true" title=" All options">
  
-|| ! || invert pin || +|| ! || Exclamation mark || Invert pin || 
-|| o || set pin to open drain || +|| o || Lowercase O letter || Set pin to open drain || 
-|| ^ || set pin to pull up || +|| ^ || [[https://en.wikipedia.org/wiki/Caret|Caret]], Shift+6 on QWERTY keyboards || Set pin to pull up (Default on most pins) || 
-|| v || set pin to pull down || +|| v || Lowercase v letter || Set pin to pull down || 
-|| - || to set no pullup || +|| - || Minus sign || To set no pullup || 
-|| @ || to set repeater mode ||+|| @ || At / Arobase sign || To set repeater mode ||
  
 </callout> </callout>