Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
pin-configuration [2017/01/25 14:19]
arthur created
pin-configuration [2017/03/18 00:07]
wolfmanjm
Line 5: Line 5:
 If other cases, a given pin is tied to a given peripheral on the board. ​ If other cases, a given pin is tied to a given peripheral on the board. ​
  
-See [http://​smoothieware.org/​pinout Pinout] to learn about which pins are where. ​+See [[http://​smoothieware.org/​pinout|Pinout]] to learn about which pins are where. ​
  
 You can have a pin's output inverted by adding a **"​!"​** after this pin's number in the config line, example :  You can have a pin's output inverted by adding a **"​!"​** after this pin's number in the config line, example : 
  
-[[code]]+<code>
 my_pin_name ​                     19! my_pin_name ​                     19!
-[[/code]]+</code>
  
 There are other modifiers for pins : There are other modifiers for pins :
  
-[[div class="bs-callout bs-callout-primary"​]] +<callout type="​primary" ​icon="​true"​ title=" ​All options">
-++++ All options+
  
 || ! || invert pin || || ! || invert pin ||
 || o || set pin to open drain || || o || set pin to open drain ||
-|| ^ || set pin to pull up ||+|| ^ || set pin to pull up (Default on most pins) ||
 || v || set pin to pull down || || v || set pin to pull down ||
 || - || to set no pullup || || - || to set no pullup ||
 || @ || to set repeater mode || || @ || to set repeater mode ||
  
-[[/div]]+</callout>