Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
g1 [2017/01/25 18:55]
arthur
g1 [2019/05/13 21:02]
arthur [Parameters]
Line 35: Line 35:
 || <​kbd>​F</​kbd>​ || Move at this speed in millimeters/​minute || G1 Z10 F100 || || <​kbd>​F</​kbd>​ || Move at this speed in millimeters/​minute || G1 Z10 F100 ||
 || <​kbd>​S</​kbd>​ || Laser power, <​kbd>​S1</​kbd>​ is 100%, <​kbd>​S0</​kbd>​ is 0% || G1 X10 S0.5 || || <​kbd>​S</​kbd>​ || Laser power, <​kbd>​S1</​kbd>​ is 100%, <​kbd>​S0</​kbd>​ is 0% || G1 X10 S0.5 ||
 +
 +<callout type="​warning"​ icon="​true"​ title="​Extruder moves and scientific notation">​
 +
 +If you write this Gcode :
 +
 +<​code>​ G1X100E100 </​code>​
 +
 +You want Smoothie to interpret it as : 
 +
 +<​code> ​
 +G1 : move
 +X10 : by 10mm in the X direction
 +E10 : while feeding the extruder 10mm of extrusion
 +</​code>​
 +
 +However Smoothie is going to interpret this as 
 +
 +<​code> ​
 +G1 : move
 +X10E10 : move in X by 10E10, which is also 10 to the power of 10, or 10000000000.
 +</​code>​
 +
 +The lesson here is : use spaces.
 +</​callout>​
  
 === Feedrate === Feedrate