Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
cnc-mill-guide [2017/01/25 18:35]
arthur
cnc-mill-guide [2019/04/27 17:39] (current)
45.72.235.192 [Appendixes]
Line 1: Line 1:
 = Your guide to installing Smoothieboard in a CNC Milling Machine = Your guide to installing Smoothieboard in a CNC Milling Machine
  
-<grid+<html
-<col md="6">​ +<image src="​http://​chibidibidiwah.wdfiles.com/​local--files/​start/​icon-cnc-mill-round-big.png" ​width="​80"​ height="​80" ​style="​float:​left;​margin-right:​20px;">​ 
- +</​html>​
-[[f<​image ​http://​chibidibidiwah.wdfiles.com/​local--files/​start/​icon-cnc-mill-round-big.png width="​80"​ height="​80"​]]+
  
 Although not as common as the Smoothiefied 3D printer, the CNC mill machine is fairly simple to Smoothiefy. ​ Although not as common as the Smoothiefied 3D printer, the CNC mill machine is fairly simple to Smoothiefy. ​
Line 12: Line 11:
 This guide is a [[http://​smoothieware.org/​irc|community]] effort, and this page is a Wiki. Please don't hesitate to [[#​_editpage|edit it]] to fix mistakes and add information,​ any help is very welcome. This guide is a [[http://​smoothieware.org/​irc|community]] effort, and this page is a Wiki. Please don't hesitate to [[#​_editpage|edit it]] to fix mistakes and add information,​ any help is very welcome.
  
-[[image https://​raw.githubusercontent.com/​Bouni/​smoothieboard-graphics/​master/​smoothieboard-fritzing.png width="​100%"]]+<​html><​image src="https://​raw.githubusercontent.com/​Bouni/​smoothieboard-graphics/​master/​smoothieboard-fritzing.png" ​width="​70%"></​html>​
  
 On a typical CNC mill or CNC router setup, installing a Smoothieboard will mean you do the following things :  On a typical CNC mill or CNC router setup, installing a Smoothieboard will mean you do the following things : 
Line 43: Line 42:
 At the end of this guide, you should have a fully working machine. At the end of this guide, you should have a fully working machine.
  
-</​col>​ +~~CLEARFIX~~ 
-<col md="​6">​ + 
-[[toc]]  +{{page>unboxing}}
-</​col>​ +
-</grid>+
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>unboxing</​kbd>​+{{page>migrating}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​warning</​kbd>​+{{page>​warning}}
  
  
Line 77: Line 74:
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​logic-power</​kbd>​+{{page>​logic-power}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​main-power-input</​kbd>​+{{page>​main-power-input}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​stepper-motors</​kbd>​+{{page>​stepper-motors}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​guide-endstops</​kbd>​+{{page>​guide-endstops}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​spindle-control</​kbd>​+{{page>​spindle-control}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​z-probe-guide</​kbd>​+{{page>​z-probe-guide}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
-<kbd>page>​panel-guide</​kbd>​+{{page>​panel-guide}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
  
 == Appendixes == Appendixes
 +When using external stepper driver, along with adding the '​o'​ to set the breakout pins to open drain you also need to add '​!'​ to invert the step and enable pins.
 === Drilling canning cycles === Drilling canning cycles
  
Line 117: Line 114:
 * If you are using Cambam you can use [[http://​chibidibidiwah.wdfiles.com/​local--files/​cnc-mill-guide/​SmoothiePCB.cbpp|this post-processor script]] * If you are using Cambam you can use [[http://​chibidibidiwah.wdfiles.com/​local--files/​cnc-mill-guide/​SmoothiePCB.cbpp|this post-processor script]]
  
-<kbd>page>​general-appendixes</​kbd>​+{{page>​general-appendixes}}
  
 ~~CLEARFIX~~ ~~CLEARFIX~~
Line 137: Line 134:
  
 == bCNC configuration == bCNC configuration
-<kbd>page>​bcnc</​kbd>​+{{page>​bcnc}}
  
 == Software ​ == Software ​
  
-<kbd>page>​software</​kbd>​+{{page>​software}}